The open placement of sewer and water mains violates the overall design of the toilet room. It is not recommended to lay a brick, because when they fail, they will have to break the entire decorative structure. Therefore, homeowners are thinking about whether it is possible to close the pipes in the toilet so that the room looks aesthetically pleasing, and the cost of restoring the design of the bathroom after they are repaired is minimal.
With the help of plastic panels, you can not only completely hide communications, but also give the bathroom a unique style
Content
The choice of materials for construction
Expert recommendations for the selection of materials are based on the basic requirements of regulatory documents and are formulated as follows:
- environmental Safety. The material should not emit harmful substances with increasing temperature and humidity;
- corrosion resistance. To reliably close the pipes in the toilet, stop your choice on material that is not only not susceptible to corrosion, but also does not contribute to its spread;
- convenience in work. The material should provide the ability to create a lightweight, not bulky design. After all, the area of the toilet room in modern apartments is very small.
When solving the problem of how to close the pipes, the contractor has several options. The most commonly used materials include the following:
- Plastic panels.
- Moisture-resistant drywall.
- Moisture resistant plywood.
- MDF - boards.
Most homeowners and contractors prefer the first option. But, even knowing how the pipes in the toilet are sewn with plastic panels, when buying, you should first of all take into account not the amount of necessary material, but how much it will harmonize with the already existing wall, ceiling and floor lining of the bathroom.
PVC panels can be selected in any color, so that the design of them fits into the overall color scheme of the bathroom
If necessary, you will always buy the missing square meters, while eliminating the dissonance in coloring will require additional unnecessary material costs.
The following factors speak in favor of the use of this material:
- masking pipes in the toilet with plastic panels does not take much time;
- the resulting construction weighs little and, if necessary, it can be dismantled without problems;
- moisture resistance and hygiene - thanks to these properties, plastic panels are the most suitable option for operation in a bathroom;
- the level of sound insulation in the toilet increases;
- the design of the panels is diverse, and their appearance is not satisfactory, so choosing the right material for the style will not be difficult;
- low price and long life.
The main disadvantage of plastic panels is a small fire resistance. Of course, many manufacturers guarantee self-extinguishing and heat resistance. But smoke is no less terrible than fire. After all, it contains many toxic compounds. So in a toilet with pipes hidden behind plastic panels, you need to beware not only of open fire, but even simple smoking.
Plastic panels do not require large financial investments for the purchase or installation, while their appearance is not inferior to tiling
Mounting options and necessary tools
You can sheathe pipes in the toilet with plastic panels in the following ways:
- In the first case, engineering communications themselves are subject to closure directly, that is, boxes are constructed around the pipes. This method will leave more free space and will save on material.
- In the second case, the wall is completely closed, that is, pipes are located between it and the panels. From the point of view of aesthetic perception, this method is more attractive, but the useful volume of the bathroom is reduced.
Advice! Before closing the pipes in the toilet with plastic panels, you need to make sure that they are reliable. Having performed this operation with a defective pipeline, you run the risk of disassembling the closing structure in the foreseeable future.
Regardless of the method, in order to sew pipes in the toilet you will need:
- construction level;
- screwdriver and screwdriver;
- mounting knife;
- hammer drill;
- fasteners (dowel-nails, self-tapping screws, screws);
- start profile;
- guide profiles used for panel mounting;
- the actual panel.
How to close pipes in a toilet with plastic panels
First, the supporting structure is prepared and its marking is carried out.. The basis of any method of closing the engineering communications in the toilet is the frame. At the first stage of its installation, it is necessary to measure the niche.
The panels are mounted on the frame, which must be built regardless of the size of the wall or niche, which is planned to be sheathed with plastic
According to the established tradition of arranging amenities in the apartment, in addition to sewage, there are also water pipes in it. Accurate measurement of the area of passage of these highways is performed using a tape measure. Upon completion of the measurements, it is recommended to draw a small sketch and display on it the exact mounting points of the frame elements and, in addition, the main dimensions of the future sheathing structure. It should be borne in mind that there must be some distance between the pipes and its components. Before closing sewer pipes, make sure they are in good condition. Cast iron gutters should be replaced immediately with plastic.
Next, fastenings are made using dowels of metal profiles or wooden longitudinal bars to the floor, ceiling and walls. Then, wooden slats or an angular profile are screwed to the lower and upper such frame elements with self-tapping screws. After that, the installation of horizontal profiles or rails at a distance of about 30-40 centimeters. At the same time, remember the need for the presence of frames with doors on the frame. The fastening of these elements is carried out at the final stage of mounting the frame.
So, the supporting structure is created. To complete the information on how the pipes in the toilet are closed with plastic panels, it should be said that there are the following ways of fixing these decorative elements:
- nails or screws (if the frame is wooden);
- kleimers;
- stapler;
- clips (only if the frame itself is made of plastic);
- with glue.
Important! When deciding how to sheathe the pipes in the toilet with plastic panels, you need to understand that the need to dismantle the false wall can arise at any time. Therefore, fixing to glue is not the best option. From this point of view, fixing with screws is advantageous.
Adhesive bonding is the fastest way to install plastic panels
The final stage of the casing involves the following actions:
- Install the starter molding on the wall. Fasten it to the profile with self-tapping screws. Moreover, the fastening should take place through a shelf, overlapped by the next panel. So the head of the self-tapping screw will not be visible.
- Place the protrusion of the next panel into the groove, and then push it in all the way. From the side where the panel is free, fix it with self-tapping screws. According to this scheme, all the walls of the frame are sheathed.
- Mount the door in the wall.
- On the outer corner, install the appropriate molding. In the same way, trim the joints of the frame with the floor and ceiling. And remember that deaf boxing is prohibited. Provide a vent at the top of at least 5 centimeters in diameter.
On this, the question of how to sew pipes in the toilet using plastic panels can be considered resolved. All that’s left to do is wipe the dust.
In conclusion, it must be said that there is one very popular way to close the pipes in a small toilet. For its implementation does not require significant labor and large financial expenses. It consists in the use of blinds. The box is mounted under the ceiling. This solution can be implemented due to the fact that when the roller shutters are opened, they are wound around the shaft, which, in turn, leads to a saving in free space. And the bathroom pipes are closed from the ceiling to the floor. The room takes on an attractive original look. Roller shutters come in different colors and are equipped with a mechanical or manual drive. Hide the pipes in the toilet using them is even easier than using plastic panels and you can do it yourself, too, without using the services of a specialist.
